Stock Appearing 6.5 HP Honda clone carburetor.
Professionally blueprinted and flow tested.
This is a High performance Modified carb, it has a large bore (.625 or .650), fuel circuitry reworked, custom emulsion tube, and specially cut throttle shaft. Will work well with a stock cam but it will really shine with a .275 or .308 lift cam. Will fit all 6.5hp Honda GX200, BSP yellow, Greyhound, Central Machinery, and equivalent clone engines.
Attention: Some have noticed that the choke shaft and butterfly are still in the carb. There is nothing wrong with the picture. Testing has shown that there is no performance gain in removing the shaft. Leaving the choke in place also makes starting the engine easier.